Analysis of the thickness of lighting tiles instal

2022-07-22
  • Detail

Daylighting tile is also called transparent tile. It is widely used, mainly for daylighting. It has the characteristics of anti-aging and impact, transparent daylighting, beautiful appearance and high cost performance

daylighting tile is also called transparent tile. It is widely used, mainly for daylighting. It has the characteristics of anti-aging and impact, transparent daylighting, beautiful appearance and high cost performance. Next, I will introduce the thickness analysis and installation method of lighting tiles

thickness analysis of daylighting tiles

1. The service life of daylighting tiles does not lie in the number of layers, but in the top layer, so multi-layer boards do not have the benefit of service life

2. Multilayer board has the characteristics of heat insulation, strong support, etc., so when choosing multilayer board, see whether to increase the cost

3. If you choose multilayer board, you can consider thickening, because thickness can increase the service life

4. Generally, in the case of small space, low height or screen partition materials, the installation method of multilayer board

daylighting tiles

1. When fixing daylighting tiles, pilot holes should be used, and the size of the holes should be 6-9mm of the screw diameter

2. The lighting tiles are fixed with aluminum gusset plates, which can be glued and sealed after being fixed. The position of the daylighting board is generally set in the middle of the span

3. When the daylighting tile is overlapped with the steel plate, the latest overlap shall be 200mm, and two Waterstops shall be pasted

4. The daylighting tile should be connected with the tapping screw, with a cover plate, and the telescopic performance of the daylighting tile should be considered when installing the daylighting tile

5. When fixing the daylighting tile, it must be between the screw and the daylighting board, so that it can be better waterproof and dustproof. After putting the flashing washer into the screw, lock it into the purlin with an electric drill, that is, complete the fixing of the daylighting board

6. During the construction of the daylighting tile, it is forbidden to step on the wave crest to prevent the daylighting tile from cracking. A 1300mmx200mm (length x width) anti-skid thick board should be placed at the transverse position of the daylighting tile, and the guide hole and fixing screw of the daylighting board should be worked by stepping on it

editor's summary: This is the introduction about the thickness analysis of the lighting tile and the installation method of the lighting tile. I hope it will be helpful to you. If you want to know more, you can pay attention to information

苏州妇科医院

上海眼科医院

深圳不孕不育医院

上海男科医院

Copyright © 2011 JIN SHI