Construction technology of PVC skirting defects of

2022-07-22
  • Detail

PVC skirting line mainly plays the role of decorating the wall, but also plays a protective role. Avoid damaging or flooding the corners. PVC skirting line is also made of a variety of materials, such as solid wood, stainless steel and so on. Do you know the construction technology of PVC skirting? Let's briefly introduce the construction technology of PVC skirting

pvc skirting line mainly plays the role of decorating the wall, but also plays a protective role. Avoid damaging or flooding the corners. PVC skirting line is also made of a variety of materials, such as solid wood, stainless steel and so on. Do you know the construction technology of PVC skirting? Let's briefly introduce the construction technology of PVC skirting

· Preparation of PVC skirting before construction

1. Materials and accessories: qualified skirting, skirting fixing cards, screws, etc

2. Decoration tools: hacksaw, pliers, electric stove, screwdriver, portable electric drill, cotton thread, oil pan, glycerin, etc

3. Construction conditions: the base course of skirting installation should be hard, flat, dry and clean, without cracks, grease and film remover, and strength ≥ C15, adhesive pull-out strength of base course ≥ 1.2Mpa; The internal and external corners of the wall and the ground are 90 ℃, and the internal and external corners are straight and flat; The wall surface shall be calendered with flat cement, and the elevation horizontal line shall be snapped at the installation position

· Construction technology of PVC skirting line

1. Select special headless steel nails with similar colors, and fix the skirting line directly on the wall. If the ground is uneven, press it down with a little force. Applicable to cement, wood and fiber walls

2. Select special headless air gun steel nails with similar colors, which are suitable for cement, wood and fiber walls and for rapid construction of large projects

3. Stick the skirting line to the required fixed position on the wall, remove the skirting line after making the corresponding marks on the skirting line and the wall, use an impact drill to drill holes at the marks, nail the wood bugs, and then use special headless steel nails or air guns to row nails to fix the skirting line directly on the wall. It is suitable for cement walls with high strength

4. Put S-shaped silica gel on the back of the skirting line, stick it to the required position on the wall, and press it hard (each two ends and the middle are fixed with about 3-4 headless steel nails). Applicable to gypsum board, cement, wood and fiber walls

· Disadvantages of PVC skirting line:

1. Poor visual effect

pvc skirting line can also be produced into imitation wood skirting line, etc., but in terms of visual effect, it is far from solid wood skirting line. Naturally, it has texture and will appear to be very classless

2. Easy to deform

according to many netizens, PVC skirting is easy to deform, and the gap increases in the second year of installation, and PVC skirting will be obvious with the bending of the wall, which is easy to deform

3. Easy to break

pvc skirting line is not suitable for high temperature drying due to its material. If it is exposed to direct sunlight for a long time, it will cause the skirting line to fade or even blister, and the surface coating will fall off

4. High construction requirements

in terms of construction technology, PVC skirting is a synthetic material, so its construction technology requirements are also relatively strict. It is necessary to carry out construction in strict accordance with the installation standards, otherwise it will bring trouble to the subsequent maintenance

here is the relevant information about the construction technology of PVC skirting. I hope this article is helpful to you. If there is anything else you don't understand, you can follow us and we will answer it for you as soon as possible

乌鲁木齐男科医院

海口男科医院

广州胎记医院

苏州男科医院

Copyright © 2011 JIN SHI